Smart Card Holders
2 Card Badge Holders – Rigid Badge Holders
If you haven’t noticed, “simple” and conventional face recognition is not enough nowadays. For that matter, companies, especially large ones, tend to follow the growing trend of Smart Card Holders use when it comes to employee ID cards. These smart cards contain circuits in the plastic, as they store information that can be used if needed.
Smart cards are growing in use as employee security in large companies where simple face recognition is not enough. Smart cards have circuits contained within the plastic that allow for stored information needed for security reasons. Such as easy access to information, financial access or even for health purposes.
For some applications, it is important that the information contained on the cards be protected against unauthorized access, when they are in the holder. The shielding is completely dependable. No signals are allowed to or from the information embedded in the Smart Card Holders, thanks to the structure of the unit. The technology and materials block cloning or skimming the information on the enclosed cards.
Cards that are suitable for the Smart Card Holders are many kinds of smart credit or debit cards, as well as any 13.56 MHz RFID technology types, including FRAC, MIFARE, TWIC, iClass, CAC and PIV cards. The holders are FIPS-approved. They work as either contactless or contact type cards.
Available in both vertical and horizontal formats. Some items available in color choices or in Clear Frosted Rigid Badge Holders.
Some items can be ordered in quantities of 50’s
Click add to cart button for purchasing.
Add 1 to cart for 100 pieces, add 2 for 200 pieces, (Except for 50’s)
1840-5081 Rigid Shielded 2-Card Badge Holder
Rigid, shielded 2 Card Badge Holders – protect personal information on contactless credit or debit cards. Or any 13.56 MHz RFID technology card including MIFARE & regular iClass, PIV, CAC, TWIC And FRAC Cards. Insert Size 3-3/8″ X 2-1/8″.
FIPS 201 Approved rigid card holders include a layer of shielded material protecting information stored on cards against unauthorized or unknown access.
Use smart card shielded holders to protect the personal information on contactless credit or debit cards or any 13.56 MHz RFID technology card, including MIFARE, iClass, PIV, CAC, TWIC and FRAC cards, from cloning or skimming.
Rigid shielded 2 Card Badge Holders hold up to two standard credit card sized cards.
Made of Lexan plastic, which is a rugged, highly-durable flexible material. The flexible nature of these Rigid Badge Holders, makes them resistant to cracking.
These FIPS approved card holders attach easily to any lanyard, badge reel or strap clip and may be worn either vertically or horizontally.
|Quantity||1 – 2||3 – 4||5 – 9||10 – 24||25 +|
Vertical Vinyl Plastic ID Badge Holder 1840-5080 – Vinyl Vertical 2-Card Badge Holder
The New Card protectors™ Shielded Holder Protects Personal Information on Contactless Credit or Debit Cards, or Any 13.56 MHz RFID Technology Card Including Mifare, iClass, PIV, Cac, Twic And Frac Cards. Insert Size 3-3/8″x2 1/8″ (86 x 54mm).
These FIPS 201 approved card holders include a layer of shielded material protecting information stored on cards against unauthorized or unknown access from cloning or skimming.
The 1840-5080 vinyl holder keeps your card protected and allows you to easily disengage the card from the shield and read your card without needing to take it completely out of the holder. See the picture to the left showing the cards on the front and back and the shield in the middle. When the cards are resting, they fit tightly against the shield, blocking the card from being read. As you approach the reader, lift the card in its flap and place it near the reader, that’s it.
This new cardprotectors Vinyl Shielded 2-Card Holder protects personal information on contactless credit or debit cards, or any 13.56 Mhz Rfid technology card including mifare, Iclass, piv, cac, twic and frac cards. Fits any standard ID (CR80) or credit card, insert Size 3-3/8″x2-1/8″. A card which is in a shielded holder cannot be read unless you remove the card from the holder. (If you do not need a shielded holder please see the 1840-6560 rigid badge holder.)
|Quantity||50 – 99||100 – 499||500 – 999||1000 – 1499||1500+|
1840-6560 Rigid 2-Card Holders
RigidWear Vertical 2 Card Badge Holders made of clear rigid plastic – holds 2 standard 2-1/8″x3-3/8″ cards. Slot and thumb notches on both sides for easy removal of each card.
RigidWear 2-card Rigid Badge Holders attach easily to any badge reel, lanyard or strap clip and accommodates vertical-oriented cards.
These clear polycarbonate 2 card badge holders are designed to last under the toughest conditions. Accommodating two standard Photo ID Badges, (Credit Card Size) with thumb slots to easily remove ID’s from the card holder.
A slot at the top of the holder allows for easy attachment to badge reels, strap clips or lanyards and hangs the badge vertically.
Protect ID’s from wear, dirt and moisture. Perfect for security, special events, exhibitions, conventions, or back stage passes. Sold in packages of 50’s.
|Quantity||50 – 99||100 – 499||500 – 999||1000 – 1499||1500 +|
1840-301X Colored Convertible Rigid Card Holder
Colored rigid plastic convertible card holder with slot/chain holes and rotating clip for horizontal and/or vertical usage.
Horizontal or Vertical Load Card Size: 2-1/8 x 3-3/8″.
1840-305x, Horizontal Side Load Colored 2-Sided Open-Face Rigid Multi-Card Holder.
Colored rigid plastic two-sided multi-card holder holds one 30 mil, (750 mic) ID card on front side and three 30 mil (750 mic) ID cards on back side. Max. card: 3-11/16″x3″.
1840-308x Vertical Side Load Colored 2-Sided Open-Face Rigid Multi-Card Holder.
Colored rigid plastic two-sided multi-card holder. Holds one 30 mil, (750 mic) ID card on front side and three 30 mil, (750 mic) ID cards or 6-8 business cards on back side. Max. card: 4-1/8″x2-3/8″.
|1840-6000 Horizontal frosty plastic Rigid ID Holder.
Thumb Notch Slot/Chain Holes – Horizontal Side Load.
Max. Card: 2-1/8 x 3-3/8″ (Holds 2 Cards Max).
|1840-6500 Vertical frosty plastic rigid badge holder.
Slot/Chain Holes – Vertical Side Load Cut on Back.
Max. Card: 2-1/8″x3-3/8″, (Holds 2 Cards Max).
1840-816X Vertical Top Load Colored Open-Face Semi-Rigid Card Holder.
Vertical semi-rigid open face card holder with slot/chain holes and rails on all 4 sides, Vertical Side Load.
Max. Card: 2-1/8″x3-3/8″.
Badge Holders Home Page Badge Holder
See Us For These and More:
Order online 24 hours a day, 7 days a week, 365 days a year.
All personal information you submit is encrypted and 100% secure.
Call Today Toll Free 800 203-4255
8 a.m. – 5 p.m. CST – Monday – Friday
Call today and receive your Supplies by tomorrow
(if they are in stock and sent by next day).
Talk with terrific people who are waiting to assist you!!