Smart Card Holder
Rigid Card Holder – Rigid Colored Card Holders
For large organizations in need of employee badges, the key elements in the choice of which one to purchase is the cost and the assurance of protection from unauthorized usage.
The 1840-5081 Rigid Shielded 2-Card Holder is shown down at the bottom, is designed for two cards. When you have the need to shield information on the card while it is in the holder, the protection offered by a shielded version is the answer to a growing problem. It effectively blocks signals so that your secure information is not available to those seeking unwarranted access.
Rigid badge holders are available in a 2-card design which is shielded. These items provide a high level of protection for a low cost. The orientation can be horizontal or vertical, as needed, thanks to the slot at the top of the case. Since most orders are for a minimum of one hundred units, the lower cost is an added benefit.
The badge holder designs are both stylish and durable. They are designed so that they won’t tear or fold. This feature provides the greatest possible protection for identification cards. When there is a need for frequent removal, the thumb notch feature makes it easy to extract the cards from the case. This makes it possible to use in situations where there are machine readable systems in operation.
Vertical Hard Plastic ID Badge Holder
1840-5080 RigidWear Vertical 2-Card Badge Holder
A clear polycarbonate 2 card rigid Smart Card Holder designed to last under the toughest conditions. This holder accommodates two standard Photo ID Badges (Credit Card Size), and has thumb slots to easily remove ID’s from the holder. The slot at the top of the holder allows for easy attachment to badge reels or lanyards This Rigidwear Clear Vertical 2-Card Badge Holder 1840-6560 hangs vertically.
FIPS 201 Shielded 2-Card Holder (#1840-5080) Use this Security Badge Holder to block signals to and from your information while its in the holder!
FIPS 201 Shielded 2-Card Holder (#1840-5080). Use this Security Badge Holder to block signals to and from your information while they are in the holder! The 1840-5080 keeps your card protected and allows you to easily disengage the card from the shield and read your card without needing to take it completely out of the holder. See the picture to the left showing the cards on the front and back and the shield in the middle. When the cards are resting, they fit tightly against the shield, blocking the card from being read by someone unauthorized. As you approach the reader, lift the card in its flap and place it near the reader, that’s it.
This new cardprotectors rigid shielded holder protects personal information on contactless credit or debit cards, or any 13.56 Mhz Rfid technology card including mifare, Iclass, piv, cac, twic and frac cards. Fits any standard ID (CR80) or credit card, insert Size 3 3/8″ X 2 1/8″ A card which is in a shielded holder cannot be read unless you remove the card from the holder.
(If you do not need a shielded holder, see the #1840-6560 rigid badge holder below.)
|1840-6000 Horizontal Frosted Plastic Rigid ID Holder.Thumb Notch Slot/Chain Holes – Horizontal. Side Load Max. Card: 2-1/8 x 3-3/8″ (Holds 2 Cards Max.)
Add to Cart
|1840-6500 Vertical Frosted Plastic Rigid ID Holder. Thumb Notch Slot/Chain Holes – Horizontal Side Load Max. Card: 2-1/8 x 3-3/8″ (Holds 2 Cards Max.)
Add to Cart
|1840-6560 Rigid 2-Card Holders
RigidWear Vertical 2-Card Badge Holder are made of clear rigid plastic and holds 2 standard 2-1/8″x3-3/8″ cards. Slot and thumb notches on both sides for easy removal of each card.
RigidWear 2-card holders attach easily to any badge reel, lanyard or strap clip and accommodates vertical-oriented cards.
These clear polycarbonate 2 card rigid badge holders are designed to last under the toughest conditions. Accommodating two standard Photo ID Badges (credit card size), with thumb slots to easily remove ID’s from the card holder.
A slot at the top of the holder allows for easy attachment to badge reels, strap clips or lanyards and hangs the badge vertically.
Protect ID’s from wear, dirt and moisture. Perfect for security, special events, exhibitions, conventions, or back stage passes.
|Quantity||100 – 299||300 – 499||500 – 999||1000 – 1499||1500 +|
Add to Cart
1840-6560 Rigid 2-Card Holders come in packages of 50.
1840-301X Colored Convertible Rigid Card Holder
Colored rigid plastic convertible card holder with slot/chain holes and rotating clip for horizontal and/or vertical usage.
Horizontal or Vertical Load Card. Size: 2-1/8 x 3-3/8″. To order go to: 1840-301X
1840-305x, Horizontal Side Load Colored 2-Sided Open-Face Rigid Multi-Card Holder.
Colored rigid plastic two-sided multi-card holder holds one 30 mil (750 mic) ID card on front side and three 30 mil (750 mic) ID cards on back side. max. card: 3.65″ x 2.94″.
Horizontal Side Load Card. Size: 3.65″ x 2.94″”. To order go to: 1840-305x
1840-308x Vertical Side Load Colored 2-Sided Open-Face Rigid Multi-Card Holder.
Rigid Colored Card Holders two-sided multi-card holder. Holds one 30 mil (750 mic) ID card on front side and three 30 mil (750 mic) ID cards or 6-8 business cards on back side. max. card: 3-3/8″x2-1/10″.
Vertical Side Load. Size: 3-3/8″x2-1/10″. To order go to: 1840-308x
1840-811x Horizontal Side Load Colored Open-Face Semi-Rigid Card Holder.
Slot / Chain Horizontal Side Load
Max. Card: 2-1/8 x 3-3/8″.
Horizontal Side Load Card. Size: 2-1/8 x 3-3/8″. To order go to: 1840-811x
1840-816X Vertical Top Load Colored Open-Face Semi-Rigid Card Holder.
Rigid Colored Card Holders are open face card holders with slot/chain holes and rails on all 4 sides, Vertical Side Load.
Max. Card: 2-1/8 x 3-3/8″.
Vertical Top Load. Size: 2-1/8″x3-3/8″. To order go to: 1840-816x
1840-5081 Rigid Shielded 2-Card Holder
The new CardProtectors™ rigid Smart Card Holder that protects personal information on contactless credit or debit cards or any 13.56 MHz, to protect smart cards. RFID technology card including MIFARE, iClass, PIV, CAC, TWIC and FRAC cards. Inset Size 3 3/8″ x 2 1/8″ (86 x 54mm)
This rigid plastic badge holder features a thumb-notch on both sides for easy card removal. It is FIPS approved. Slots on back accommodates vertical or horizontal use – same holder can be used for both orientations. These rigid card holders include a layer of shielded material protecting information stored on cards against unauthorized or unknown access.
Rigid shielded 2-card holders hold up to two standard credit card sized cards and include two thumb notches for easy removal of each card. Slot pull strength of 89 lbs.
Here are some of the other options to chose from.
- PVC Badge Holders
- Smart Card Holder
- PVC CAC Card Badge Holder
- Side Load Hard Plastic ID Holders
- ID Badge Holder
- ID Card Holder
- Multi Card Holder
- Smart Card Holders
- Rigid Colored Card Holders
- Side Load Hard Plastic ID Holder
- Plastic Badge Holders
- Plastic Dual Side ID Holder
- Plastic Dual Side ID Holders
- Multi Card Holders
- Plastic ID Card Holders
Go to our Rigid Badge Holders Page, select the thickness or color you need. Then order the number you need. It’s that simple.
To See our entire selection of Badge Holders, go to: Badge Holders
Order online 24 hours a day, 7 days a week, 365 days a year.
All personal information you submit is encrypted and 100% secure.
Call Today Toll Free 800 203-4255
8 a.m. – 5 p.m. CST – Monday – Friday
Call today and receive your Supplies by tomorrow
(if they are in stock and sent by next day).
Talk with terrific people who are waiting to assist you!!